Plastic products are becoming more and more popular with relevant manufacturers. Nowadays, products of this kind of material are also everywhere in the market, for example, they are widely used in the beverage industry and pure water industry.
Good products depend on good production equipment, a good plastic blow molding machine equipment at www.dianyamold.com, not only the production process is good, but also the quality of the operators must also have a considerable level. There must be certain knowledge of use and maintenance in production.

1. Before going to work, check the blow molding machine to see if there is any need to add lubricating oil.

2. Before starting production, check whether the various parts of the machine are reliable, and if any parts are found to be loose, they should be reinforced in time. Prevent bad consequences.

3. Check whether the power, air pressure, water, etc. of the machine are normal before starting the machine.

4. Check the relevant safety measures at the beginning of the blow molding machine, such as checking whether the grating and emergency stop are normal.

5. Check whether the lamps and lighting devices related to the equipment are normal, and replace them if there is any damage.

6. Check whether there is any air leakage or water leakage in the relevant devices of the equipment.

7. Before the machine works, the machine must be cleaned, and the mold must be cleaned and maintained at the beginning and end of the work.

8. The blow molding machine needs to be preheated for half an hour before starting operation. If there is no problem after running for a period of time, it will be officially put into production.