Grilled A potato, corn, and A steak.
Just got done with dinner!
I am about to mess with Rocky
Alright John, catch you on Wednesday
I am pleased with the rebuild I did on the hydraulic Jack, it is now all silver and shiny diamond plate
Living on a dirt road with tons of clay and sand will kill some metal parts
They are not bad, only $25 a hose, so I guess Etrailer will be getting a call or two after the next few paydays
I am also looking to change the hoses out with ones with stainless tips
the company that makes the disc brake kit changed their part number scheme over the last 14 years
Well if it’s $600 minimum for new. You should be saving Money
I also ordered new pads, they were not cheap either, $85 set, good thing I did some more research I almost bought pads for a 9-10K# axle
That is only one caliper out of 4, that is the only one I inspected
Always cheaper, unless there is to much corrosion
GN Marlene, catch you Wednesday
Marlene Resch
3 years ago
Ok... I will let the two of you talk motor/car parts. I am going to listen to Crossroads. Goodnight! 😁😁
cheaper than ordering new calipers to the tune of $145 for cast and $250 for stainless steel
ordered new rubber sleeves and pin sleeves, but just in case I hurt the rubber dust cover on the piston I ordered one of those as well
Tape up the shiny parts before you do that
I want to pull it off and throw it in the blast cabinet, thinking I have some scale or heavy rust in that end of the caliper
Marlene Resch
3 years ago
Well... at least you don’t have labor costs. May need to paint the hinges?
You might, depending on the size, Autozone might have one you can borrow.
I am having a problem with one of the pins sticking, looking to replace the rubber and the pin sleeve
Marlene Resch
3 years ago
Switched to my cell. Giving the laptop a rest