https://www.spreaker.com/show/raw-automation-talk
In the future we’ll get into some horror stories and hash out more. We wanted to provide experiences starting from an electrician, to a technician to a programmer, and then to an owner.

Our Linkedin accounts
https://www.linkedin.com/in/johnny-jones-012b7285/
https://www.linkedin.com/in/brant-wiederholt-b75133b1/]]>enTechnologyCopyright Brant Wiederholthttps://d3wo5wojvuv7l.cloudfront.net/t_rss_itunes_square_1400/images.spreaker.com/original/58b8d2d24afaad426b8c803258c84106.jpghttps://www.spreaker.com/show/raw-automation-talkMon, 15 Aug 2022 20:55:53 +0000Brant WiederholtBrant Wiederholtb.wiederholt@agileautomation.netIn this podcast you’ll be listening to Johnny Jones from Induasol and myself. We now own automation companies but came up from the bottom. We kept having conversations about automation over the phone until we finally convinced ourselves that we needed...
In the future we’ll get into some horror stories and hash out more. We wanted to provide experiences starting from an electrician, to a technician to a programmer, and then to an owner.

Our Linkedin accounts
https://www.linkedin.com/in/johnny-jones-012b7285/
https://www.linkedin.com/in/brant-wiederholt-b75133b1/]]>yesepisodichttps://www.spreaker.com/user/16542072/podcast5wholeephttps://api.spreaker.com/episode/50922840Mon, 15 Aug 2022 20:55:51 +0000Brant Wiederholt2902automation,control,hmi,manufacturing,plcyes5fullhttps://www.spreaker.com/user/16542072/ep4audiohttps://api.spreaker.com/episode/50922839Mon, 15 Aug 2022 20:54:48 +0000Brant Wiederholt3054automation,control,hmi,manufacturing,plcyes4fullhttps://www.spreaker.com/user/16542072/ep3audioWhy can’t factories standardized on PLCs10
Electricians or operators becoming last minute automation techs
Clicky clack (relay logic)
PLC comparison
When was Windows 7 released?
Have you seen Windows XP?
At some level we have to re-write the code for these old machines.
issues with running RSlogic 5000 versions 19 or earlier
A new machine with RSlogix 5000 version 19
What about the old discontinued micrologix PLC
Are these companies running these machines too long?
How many plants have you been to that have AB, siemens, ect
Bad HMI design
PLCnext scalability
When do you go from Micro800 to ControlLogix
Redundancy is overkill. Fans are the issue]]>https://api.spreaker.com/episode/50777356Mon, 01 Aug 2022 15:59:28 +0000Brant WiederholtWhat to do with old machines? Why can’t factories standardized on PLCs10 Electricians or operators becoming last minute automation techs Clicky clack (relay logic) PLC comparison When was Windows 7 released? Have you seen Windows XP?...Why can’t factories standardized on PLCs10
Electricians or operators becoming last minute automation techs
Clicky clack (relay logic)
PLC comparison
When was Windows 7 released?
Have you seen Windows XP?
At some level we have to re-write the code for these old machines.
issues with running RSlogic 5000 versions 19 or earlier
A new machine with RSlogix 5000 version 19
What about the old discontinued micrologix PLC
Are these companies running these machines too long?
How many plants have you been to that have AB, siemens, ect
Bad HMI design
PLCnext scalability
When do you go from Micro800 to ControlLogix
Redundancy is overkill. Fans are the issue]]>3123allenbradley,automation,plcyes3fullhttps://www.spreaker.com/user/16542072/raw-automation-talk-episode-2In this podcast you’ll be listening to Johnny Jones from Induasol and myself. We didn’t get through everything, so the items that we missed, we’ll talk about in our next episode.


0:00 Introduction
1:00 Panel work load for Oil and gas
3:20 Typical ways that Oil and gas get their data
5:12 5G at oil and gas sites
8:20 Well site protocol
11:30 Chillicothe plant horror stories
13:48 Biggest complaint from operators
17:09 NFPA 70E
22:30 finger safe distribution blocks
24:12 Buss bars systems
28:00 Callouts and BOMs
29:20 Electrical drawing standards
33:47 Wire labels
38:22 When you know a plant will be sold
39:56 System designing with either AB 800 or Controllogix
1:00:55 RIO vs independent PLCs]]>https://api.spreaker.com/episode/50299165Wed, 22 Jun 2022 21:11:39 +0000Brant WiederholtRaw Automation talk In this podcast you’ll be listening to Johnny Jones from Induasol and myself. We didn’t get through everything, so the items that we missed, we’ll talk about in our next episode. 0:00 Introduction 1:00 Panel work load for...In this podcast you’ll be listening to Johnny Jones from Induasol and myself. We didn’t get through everything, so the items that we missed, we’ll talk about in our next episode.


0:00 Introduction
1:00 Panel work load for Oil and gas
3:20 Typical ways that Oil and gas get their data
5:12 5G at oil and gas sites
8:20 Well site protocol
11:30 Chillicothe plant horror stories
13:48 Biggest complaint from operators
17:09 NFPA 70E
22:30 finger safe distribution blocks
24:12 Buss bars systems
28:00 Callouts and BOMs
29:20 Electrical drawing standards
33:47 Wire labels
38:22 When you know a plant will be sold
39:56 System designing with either AB 800 or Controllogix
1:00:55 RIO vs independent PLCs]]>5082automation,ignition,iiot,inductiveautomation,plc,scadayes2fullhttps://www.spreaker.com/user/16542072/2022-05-07-raw-automation-talk

0:00 What makes a good programmer
4:00 The perfect technician
6:06 Underwear and machines that need to be thrown away
14:16 Manufacturing plant software support
17:28 learning relay logic for beginners
19:36 latching bits (when and how to use it)
22:46 Panel building
25:36 what we find out in the field with analog terminals
27:50 What terminals do you like to use
37:20 Fluke or Harbor freight Voltmeter
40:13 0-10volt still out in the field
42:00 Panel hardware preference
43:40 How did you come up with the name Induasol?
44:21 Oil and gas, truck loading project
50:25 HMI direction
51:20 Allen bradley panelviews have bad UI designers
54:20 Panelview vs Pro-face
56:11 AB version issues
58:00 Panelview backlight issues
59:59 HMI vs PC with Ignition
1:05:25 4:3 vs 16:9 cost issues long term
1:07:30 Logic in the cloud
1:09:47 Allen bradley certifications
1:12:55 Where to get started with automation
1:15:45 Revision control]]>https://api.spreaker.com/episode/49786024Sat, 07 May 2022 14:35:00 +0000Brant WiederholtIn this podcast we go from men’s underwear to panel terminals. This was our first time doing a podcast, and of course we made mistakes. We’re trying to make this fun to listen to, similar to “Car talk”. 0:00 What makes a good programmer 4:00...

0:00 What makes a good programmer
4:00 The perfect technician
6:06 Underwear and machines that need to be thrown away
14:16 Manufacturing plant software support
17:28 learning relay logic for beginners
19:36 latching bits (when and how to use it)
22:46 Panel building
25:36 what we find out in the field with analog terminals
27:50 What terminals do you like to use
37:20 Fluke or Harbor freight Voltmeter
40:13 0-10volt still out in the field
42:00 Panel hardware preference
43:40 How did you come up with the name Induasol?
44:21 Oil and gas, truck loading project
50:25 HMI direction
51:20 Allen bradley panelviews have bad UI designers
54:20 Panelview vs Pro-face
56:11 AB version issues
58:00 Panelview backlight issues
59:59 HMI vs PC with Ignition
1:05:25 4:3 vs 16:9 cost issues long term
1:07:30 Logic in the cloud
1:09:47 Allen bradley certifications
1:12:55 Where to get started with automation
1:15:45 Revision control]]>4741allenbradley,automation,electrical,hmi,panels,panelview,plc,pro-face,programmers,redlion,scadayes1full